Контактное лицо
СООО "Хеннлих"

Ул.Бирюзова, 4/5, пом.1012

220073 Минск

Беларусь

+375 17 207 3921
COOO "Hennlich"

Biryuzova street, 4/5, office 1012

BY 220073 Minsk

Republik Belarus

+375 17 207 3921

Spherical ball, A350EM, replacement spherical ball, slim, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® A350
  • For various metal bearing housings
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • For use with temperatures up to +180 °C
  • For medium to high loads
  • Equally good for both oscillating and rotating applications
  • Материал сферического шарика: iglidur® A350
Описание продукта
igubal® spherical ball A350 slim
 
Every single iglidur® material has its own special properties, which determine its suitability for specific applications and requirements.
An universal plain bearing for use in the area of food and pharmaceutical industries. Composition of FDA-compliant materials allows its use in areas where other plain bearings cannot be used due to the contact with food. With good tribological and mechanical properties, iglidur® A350 plain bearings are suitable for all-round use in and around food machinery. The spherical ball for metal bearing housings are available for housing numbers 203 to 210.
 
Material properties
  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • For use with temperatures up to +180 °C
  • For medium to high loads
  • Equally good for both oscillating and rotating applications

Typical application areas  
When to use it?
  • If you need maintenance-free materials
  • If high compressive strength is required
  • If high flexibility is required
When not to use it?
  • If temperatures are higher than +180 °C
  • If diameters above 40 mm are required
  • If rotation speeds higher than 0.5 m/s are required
Чтобы найти нужный продукт, воспользуйтесь возможностями фильтрации

Tolerances
 
Maintenance-free igubal® spherical balls are designed with a tolerance of the inner diameter of E10. The shaft tolerance should be between h6 and h9. Unless stated otherwise, all tolerance values are treated according to DIN ISO 2768-m
Технические характеристики
Загрузки

Другие решения

Консультации

Отправка и консультация

Лично:

С понедельника по пятницу с 9:00 до 17:30.

Online:

24h