Контактное лицо
СООО "Хеннлих"

Ул.Бирюзова, 4/5, пом.1012

220073 Минск

Беларусь

+375 17 207 3921
COOO "Hennlich"

Biryuzova street, 4/5, office 1012

BY 220073 Minsk

Republik Belarus

+375 17 207 3921

Spherical thrust bearing, SAM, igubal®

  • To compensate for edge loads
Описание продукта
igubal® spherical thrust bearings
 
igubal® self-aligning spherical thrust bearings are very easy to fit and help to compensate for alignment errors and prevent edge loads. The ball pan consists of the impact-resistant, rigid, thermoplastic igumid G composite material.
The spherical washer consists of an iglidur® W300 as a standard. This combination results in particularly good friction and wear characteristics during relative movements.
  • Easy installation
  • Compensation of misalignment errors
  • Compensation of edge loads
  • Very good friction and wear properties
When to use it?
  • If you want to save weight
  • If corrosion resistance is requested
  • If a bearing with a good coefficient of friction is required
When not to use it?
  • At very high loads
  • If temperatures are higher than +80 °C
  • If a high rotational speeds have to be achieved
  • If gliding speeds higher than 0.5 m/s are required
Чтобы найти нужный продукт, воспользуйтесь возможностями фильтрации
Loads
 
The load capacity of igubal® spherical thrust bearings is very high for standard ambient temperatures. For high continuous loads and high temperatures, the load capacity of the thrust bearings should be tested in an experiment that simulates the application.
Assembly
 
The housing pad is installed in such a way that it is countersunk and secured. The spherical washer is loosely fitted in the pad and is held in place by the shaft that is placed into the bearing.
Технические характеристики
Загрузки

Другие решения

Консультации

Отправка и консультация

Лично:

С понедельника по пятницу с 9:00 до 17:30.

Online:

24h